Locking bolt, with screw-on plate

zinc alloy

Art. no. 226.57.708

  • Drehstangen-Schloss-System Piccolo-Nova

     

    für geteilte Profilstangen Durchmesser 6 mm

    Das Drehstangen-System Piccolo-Nova mit schmalem Schlosskasten ist eine vielfach erprobte Lösung für jede Einbausituation. Es umfasst Schlösser mit Zuhaltungen, Plättchen- und Stiftzylindern sowie Vierkantnuss und/oder Schlossrosette zur Kombination mit Aufbausystemen.

    Die beiden erhältlichen Dornmaße 15 mm und 25 mm ermöglichen bei Eck- und Reihenschränken bei gleichem Bohrbild ein identisches Fugenmaß.

     
     
     

    Beispiel: Maße bei 19 mm Holzdicke und 3 mm Fuge (die farbigen Maße dürfen nicht verändert werden)

    Übersicht über das Drehstangen-Schloss-System Piccolo-Nova

     
  • Drehstangen‐Schloss‐System Standard‐Nova

    für geteilte Profilstangen Durchmesser 8 mm

    Das Drehstangen‐System Standard‐Nova mit breitem Schlosskasten ist eine bewährte Standard‐Lösung für jede Einbausituation. Es umfasst Schlösser mit Plättchen‐ und Stiftzylindern sowie Vierkantnuss und/oder Schlossrosette zur Kombination mit Aufbausystemen.

    Übersicht über das Drehstangen‐Schloss‐System Standard‐Nova

     
  • Symo is a modular cylinder core system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum costs and effort.

     

    Due to the variety of components within the Symo system, all present and future applications can be covered – and all this with maximum freedom during planning and execution.

     

    All components of the Symo system can be combined as required and exchanged, modified or upgraded at any time.

     

    Locking plans can be modified easily, quickly and economically. Only the cylinder core is replaced (without tools), the lock - and therefore the piece of furniture - remains untouched.

    Rational furniture production

    Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the required cylinder core at any time. The furniture can therefore be produced independently from its future use and from the required locking plans, and can be equipped with the required locks. This allows rational mass-production. The individual locks can be integrated into the locking plan by inserting the cylinder cores at any time, even after the furniture has been set up.

    Inserting and removing cylinder cores without tools

    No tools are required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder cores can only be inserted or removed with the lock in open position. The cylinder can be removed using a removal key.

    Maintain the cylinder cores every 6 month, but do not treat the cylinder cores with graphite!

    Flexibility and economic efficiency – at any time

    Previously, removals, changed locking plans and security requirements as well as lost keys were the weak points of every locking plan which always required time-consuming and costly modification measures. Symo provides maximum flexibility even years after completion. Simply replace the cylinder cores to adapt the furniture locking concept to changed requirements. No tools are required and the installation is fast and simple. Whatever the requirements are: Symo is prepared.

     

    Plate cylinder or pin tumbler cylinder?

    With the Symo locking system you can choose between plate cylinders and pin tumbler cylinders.

     
     
     
     
     
    UniversalUniversal Objekt
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Premium 5

    Premium 20

    One protective cap, several functions !

     

     
     

    The protective caps for the Symo locks not only protect the interior of the cylinder housing against dirt or damages during the construction phase, but also function as temporary construction keys that can be operated with a coin or screwdriver due to their design. After construction is completed, the protective caps can be removed easily without tools and replaced by the required cylinder cores.

    zinc alloy

    Art. no. 226.57.708

    Art. no. 226.57.708
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Piece Min. 1
    See Required Products
    Article details

    Finish

    Nickel plated polished

    Packing

    1 or 20 or 200 pieces

    Material

    Zinc alloy

    Installation

    For screw fixing (use slot for adjustment)
    Show more information
    18 October 2019

    Locking bolt, with screw-on plate

    zinc alloy

    • see key

      Please consider that the extending rods must be cut to required size when designing the cabinet and when choosing the accessories for the espagnolette lock:

      With given internal cabinet height ⓒ and when mounting the espagnolette lock in the centre, the upper rod dimension is ⓐ and the lower rod dimension is ⓑ. Centre of housing ⓓ – 25 mm

      Due to the three different backsets (15, 25 and 40 mm), identical gap sizes can be produced for corner units and rows of cabinets with the same drilling pattern.

      Note: Standard Nova, backset 40 mm is prepared for continuous profile rods.

    Note: The image may show a similar article

    Note

    Please select an article via the features or article table in order to add it to the cart.