End panel, For Cusio cutlery tray

  • Blum Tandembox drawer
  • Tandembox

    Tandembox is a double-walled drawer side system with concealed runners.

     
     
     

    A wide range of applications in furniture construction can be covered with the Tandembox system. This does not just include drawers, internal drawers, front extensions and internal extensions but also special applications such as drawers for cutlery, kitchen utensils and small items, extensions for bottles, supplies, pots and pans, plates and plastic containers.

     
     
     

    The drawer runners are characterised by following features:

    • Stainless steel, steel or aluminium drawer sides
    • Full extension
    • Roller bearing runners
    • Self-closing mechanism
    • Load bearing capacity 30 – 65 kg
    • Integrated soft closing mechanism
     

    System height N: Low drawer sides (68 mm), space requirement 81.5 mm, for flat kitchen utensils such as baking trays.

    System height M: Medium height drawer sides (83 mm), space requirement 96.5 mm, standard height for cutlery inserts, for example.

    System height K: High drawer sides (115 mm), space requirement 128.5 mm, for higher kitchen utensils such as spice jars.

    System height B: Medium height drawer sides (83 mm) with single railing, space requirement 160 mm, e.g. for preserving jars.

    System height C: High drawer sides (116 mm) with single railing, space requirement 192 mm, e.g. for storage jars.

    System height D: Medium height drawer sides (83 mm) with double railing/double-walled Boxside/Glasboxside, space requirement 224 mm, e.g. for saucepans.

     
     
     

    All drawer sides can be used as internal drawers or internal extensions from system height M and above.

     
     
     

    Suitable cabinet rails must be ordered separately. Three variants are available with load bearing capacity of 30, 50 and 65 kg per pair and nominal lengths of up to 650 mm.

     
     
     

    The accessories for the Tandembox system also include front fixing brackets, railing set, parallel control, Boxsides and Glasboxsides.

     
     
     

    The cutting dimensions for the panel and the planning dimensions for the drawer, internal drawer and front extension can be found on the pages that follow.

     
     
     

    Orga-Line

    The Orga-Line drawer compartment system can be used toorganise storage space. The trays and the crossways and lengthways dividers can be individually combined and added as required.

     
     
     

    This variable system provides space for cutlery, kitchen utensils, electrical equipment and many other utensils in the drawer.

     
     
     

    Supplies, pots and pans, plastic containers, bottles, knives, spices and plates can be accommodated and organised in the front extension in the best possible way using Orga-Line. Lengthways and crossways dividers that can be adjusted without tools provide organisation and clarity.

     
     
     

    The removable trays are made from top quality stainless steel, and are also hygienic and dishwasher-safe.

     
     
     

    All kinds of bottles are protected and close to hand in the bottle extension next to the cooker. Appropriate crossways dividers reliably hold the bottles and provide the necessary organisation.

    Overview of Tandembox system heights

    System height

    Drawer side height

    mm

    Space requirement

    mm

    Drawer

    N

    68

    81,5

    Drawer/internal drawer

    M

    83

    96,5

    Drawer

    K

    115

    128,5

    Front extension/internal extension

    B

    83

    160

    Front extension

    C

    116

    192

    Front extension/internal extension

    D

    83

    224

    * min. internal height

    Filter

    Complete your selection

    End panel, For Cusio cutlery tray

    Note: The image may show a similar article

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    NONE Min. 1
    Add to cart

    Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

    End panel, For Cusio cutlery tray

    Graphite translucent

    Art. no. 556.90.391

    End panel, For Cusio cutlery tray

    Black

    Art. no. 556.90.491

    End panel, For Cusio cutlery tray

    White translucent

    Art. no. 556.90.691
    Product details

    Area of application

    For use on the side of drawer inserts, when the drawer is wider than the cutlery insert and only one insert is required

    Material

    Plastic

    Version

    Suitable for left or right side

    Mounting

    Slides into cutlery insert

    Note

    Use Cuisio end pieces to create a universal Cuisio insert that will fit any drawer (with a space to the left and / or right of the insert for large utensils.

    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    13 June 2021